Hydro-Optic UV System performs automated dose control, UVT monitoring and water stream disinfection.
RZB300-15 is an enhanced system of the RZB300-11 Hydro-Optic UV System. Ten high intensity medium pressure UV lamps provide effective and cost-efficient water treatment. RZB300-15 Hydro-Optic UV System features excellent performance in cold and warm water. Integrated Control software automatically adjusts the UV dose to changes in real-time conditions. High grade quartz treatment chamber captures UV light rays and reflects them back into the water. Advanced Control System provides real-time information regarding UVT, flow, power and UV dose. UV lamps are protected by high grade silica quartz tube. RZB300-15 consists of five sections that are added together according to the application and desired UV dose. Each section includes UV lamp, pipe section and independent ballast unit for autonomous water treatment.
Atlantium RZB300-15 Hydro-Optic System includes:
- Disinfection unit
- Ballast module
- Controller
Operating conditions
The recommended operating water stream temperature is from 0 °C to 60 °C (32-140 °F). The required maintenance water temperature is from 0 °C to 90 °C (32-194 °F). The maximum ambient temperature is 40 °C (104 °F). The maximum working pressure is 7 bar (102 PSI).
Brand | Atlantium Technologies |
Number of lamps | 10 |
Unit Length (mm/inch) | 2329 / 91.7 |
Unit Weight (kg/lb) | 403 / 888.4 |
Unit volume (liter/gallon) | 149 / 39.4 |
Unit chamber width at widest point (mm/inch) | 505 / 20 |
Required service clearance on sides (mm/inch) | 750 / 29.5 |
Minimum Height above floor (mm/inch) | 750 / 29.5 |
Standard pipe connection options | Flange DIN2576 DN350 PN16° / Flange ANSI B 16.5 14” 150lb |
Operating water temperature | 0-60°C / 32-140°F |
Maintenance water temperature | 0-90°C / 32-194°F |
Maximum ambient temperature | 40°C / 104°F |
Maximum Flow Rate | Application dependent |
Maximum working pressure | 7 bar / 102 PSI |
Disinfection chamber material | High grade fused silica (quartz) |
Housing material | Electro-polished stainless steel 316 / Super duplex |
Controller | Integrated, with flat touch screen user interface, remote monitoring and control optional |
Electricity requirements | 200 / 380 / 400 / 440 / 480 / 600 / VAC 3 phases 50/60 Hz |